The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
$7.99 - $9.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 Extenders included for desired protection
$8.99 - $10.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.
$5.99 - $15.99 $15.99 Up to 63% Off
Electra's motorcycle-inspired Genuine Leather Streamers add road warrior style to any ride. Simply slip these stylish streamers into the end of your grips and set out on the open road.
Beautiful and realistic flower adds a feminine touch to any ride.
Since the invention of the bicycle there’s been one constant…”How much does it weigh?” Whether it’s a wheelset, frameset, tool set, or whatever else riders get fixated on, weight matters. The Alpine Scale was the first Feedback Sports product and it was the first scale of it’s kind to be built (and patented) specifically to be clamped in a bike repair stand. With unmatched consistency and precision, ability to go quickly between pounds decimal, pounds and ounces, grams and kilograms with double the accuracy of our competitors, this is your hang scale of choice. - Easily clamped in a bike repair stand - Measures in precise 10g (0.02lb) increments - Easily swaps between pounds decimal, pounds and ounces, grams and kilograms - 8.5? (21.5cm) top nylon loop allows to hang from a hook, tree branch or by hand - Accuracy within ±10g (0.02lb) - 55lb (25kg) maximum load - Coated hook protects your frame or components - Zero and Tare functions for clearly and accurately identifying weight differences - Auto shut-off saves battery life - (4) AAA batteries included - 1-Year Warranty
Keep your pant legs clean and clear of the drivetrain while commuting with the Bontrager Town Pant Strap. Strap adjusts to fit with hook and loop closure. It features high quality 3M reflective materials.
Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.
The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K
Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.
K-Edge Cross Single adds additional protection to a single ring set-up by preventing the chain from jumping up or off the ring. - Eliminate chain-drop due to rough terrain - For use with single chainring cranksets - Clamps and adjusts independent of front derailleur - Chain catcher pad is shaped to allow for 'bottom' chain derailment without chain drop when back pedaling is necessary for foot adjustment and will re-align the chain when forward pedaling is resumed - Use with a chainring guard for maximum chain control - Compatible with framesets that allow for a 'low' mounting position (minimum of 53.2 mm from the bottom of the cross clamp to the center axis of the crank spindle is required for a 32T chainring)
Everything you need for the best indoor trainer experience possible. Includes: - Trainer Mat - Climbing Block - CycleOps towel.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
$14.99 - $21.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 2 small frame protectors - 2 large frame protectors - 14 mils thick polyurethane for durability - UV Resistant
An adjustable, rear integrated kickstand that supports bikes of all sizes, from 24" to 29" wheels. Adjustable length fits more bikes Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. - Adjustable length fits bikes with 24-29-inch wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Will not interfere with pedaling - Super strong and stable platform will hold your bike upright even with gear on the rack
Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included
Park's Digital Scale accurately weighs bikes, frames and components. It measures in both pounds and kilograms to the tenth and includes a dual-position, silicon-coated hanging hook. Plus, its unique design allows it to be clamped solidly in a repair-stand and hung from a hook.
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Know the exact weight of your parts with Park's Tabletop Digital Scale. This precise scale is accurate to 2 grams and weighs components up to 3,000 grams (that's more than 6 pounds for us 'mericans). It switches easily between grams and ounces and has a tare feature to exclude the weight of a container. (Not responsible for extreme gram counting.)
• Disc brake adapter for NCS fenders • Makes NCS fenders better fit disc brake bikes
Make quick work of any bottle-cap-removal operation with Park's BO-5 Wall Mount Bottle Opener. This handy tool is made of stainless steel and even looks like a water bottle cage. Plus, there's a built-in cap catcher to keep your shop floor tidy.
Page 1 of 1